GLS Fab #20

Powatone GLS20 titanium tig welding.jpg
Powatone GLSfab gls cup GLS20 3.jpg
Powatone GLSfab gls cup GLS20 2.jpg
Powatone GLSfab gls cup GLS20.jpg
Powatone GLSfab gls cup GLS20 4.jpg
Powatone GLS20 titanium tig welding.jpg
Powatone GLSfab gls cup GLS20 3.jpg
Powatone GLSfab gls cup GLS20 2.jpg
Powatone GLSfab gls cup GLS20.jpg
Powatone GLSfab gls cup GLS20 4.jpg
sold out

GLS Fab #20

70.00

GLS Fab is replacing all PTFE (teflon) cups with titanium cups.

GLS Fab titanium cups are in production and will be ready soon.

Add To Cart

This GLS fab #20 pack contains 1 PTFE tig cup with a diffuser.

The GLS#20 is a DC polarity only PTFE tig cup to be used with a 2.4mm tungsten only. Rated to a maximum of 150 amps. The #20 cup dimensions are 33mm long with a cup outlet id of 32mm. The major benefit of a PTFE cup and what makes this cup unique is that it’s DROP PROOF and will not break when dropped unlike glass and ceramic cups. The GLS#20 is recommended for stainless steel, mild steel, titanium and inconel and works best on larger applications where more gas coverage is needed, this is my go to cup for welding titanium.

You must not rest/sit the cup on the material being welded as it will melt and/or deform.

SAFETY: The GLS Fab Tig Cups are made from PTFE also known as Teflon which can release toxic gasses when heated above 300 °C. Therefore they must never be used above 150 amps or in any condition where the cup will exceed 300 °C or acute lung injury may occur.

Mounting: The GLS Fab Tig Cups are fully machined, require no o-rings, has a 4 layer mesh diffuser and is threaded to screw onto a 9/20 gas lens or a 17/18/26 stubby gas lens SEE BELOW.

Click on the link below to take you to the listing:

17/18/26 Gas Lens Kit

9/20 Gas Lens Kit

All prices are plus GST.

From left to right GLS#12, GLS#16 and GLS#20

From left to right GLS#12, GLS#16 and GLS#20