GLS Fab #12

powatone exhaust centre glsfab cup 20.jpg
powatone exhaust centre glsfab cup 21.jpg
powatone exhaust centre glsfab cup 14.jpg
powatone exhaust centre glsfab cup 16.jpg
powatone exhaust centre glsfab cup 13.jpg
powatone exhaust centre glsfab cup 20.jpg
powatone exhaust centre glsfab cup 21.jpg
powatone exhaust centre glsfab cup 14.jpg
powatone exhaust centre glsfab cup 16.jpg
powatone exhaust centre glsfab cup 13.jpg

GLS Fab #12

55.00
Quantity:
Add To Cart

The GLS#12 is a DC polarity only PTFE cup to be used with a 2.4mm tungsten only. Rated to a maximum of 150 amps. The #12 cup dimensions are 30mm long with a cup outlet id of 20mm, it is durable and will not break when dropped unlike glass cups. The GLS#12 is recommended for stainless steel, mild steel, titanium and inconel and works best on thinner and smaller applications.

You must not rest/sit the cup on the material being welded as it will melt and/or deform.

SAFETY: The GLS Fab Tig Cups are made from PTFE also known as Teflon which can release toxic gasses when heated above 300 °C. Therefore they must never be used above 150 amps or in any condition where the cup will exceed 300 °C or acute lung injury may occur.

Mounting: The GLS Fab Tig Cups are fully machined, require no o-rings, has a 4 layer mesh diffuser and is threaded to screw onto a 9/20 gas lens or a 17/18/26 stubby gas lens SEE BELOW.

Click on the link below to take you to the listing:

17/18/26 Gas Lens Kit

9/20 Gas Lens Kit

 Top 9/20 torch  Bottom 17/18 torch

Top 9/20 torch

Bottom 17/18 torch